Lubrication Of Adjustable Stand; Repairs - Husqvarna MS 360 G Manuel D'utilisation

• Then screw the adjuster screw (2) for the belt
tensioner under the machine, either to tension the belt
or to loosen the belt when changing.
• Ensure the belt is correctly tensioned. (40 Hz)
• Assemble the parts in the reverse order.
Note! Make sure that the pump pulley (A) is pressed down
towards the belt (B). C: Blade pulley, D: engine pulley.
A
B
C

Lubrication of adjustable stand

• The adjustable stand can be lubricated with grease in
the guide tracks.
20 – English
MAINTENANCE AND SERVICE
2
D

Repairs

All types of repairs may only be carried out by authorised
repairmen. This is so that the operators are not exposed
to great risks.