Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna K6500 II Ring Manuel D'utilisation

Symbols on the machine:

This manual is the North American version used in the US
and Canada.
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective equipment.
See instructions under the heading
"Personal protective equipment".
Ensure the blades are not cracked or
damaged in any other way.
Do not use circular saw blades
WARNING! Dust forms when cutting,
which can cause injuries if inhaled. Use
an approved breathing mask. Always
provide for good ventilation.
WARNING! Sparks from the blade can
cause fire in combustible materials
such as: petrol (gas), wood, clothes,
dry grass etc.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and
understand the instructions in the
manual before using the machine.
Type plate
Row 1: Brand, Model (X,Y)
Row 2: Serial No. with
manufacturing date (Y, W, X):
Year, Week, Sequence No.
Row 3: Product No. (X)
Row 4: Manufacturer
Row 5: Manufacturer address
Row 6: A: Output power, B: Ring cutting blade rpm, C:
Ring cutting blade capacity
Row 7: Country of origin
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
2 – English

KEY TO SYMBOLS

XXXXXXXXX YYYY
s / n YYYY WWXXXXX
XXX XX XX-XX
Husqvarna AB
56182 Huskvarna, SWEDEN
AAAAA BBBBB CCCC
Made in Sweden

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
WARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CAUTION!
CAUTION! Used if there is a risk of injury
!
to the operator or damage to the
surroundings if the instructions in the
manual are not followed.
NOTICE!
NOTICE! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.