Setting The Time; Setting The Alarm - Grundig CMS 2000 BT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SETTINGS
Setting­the­time
1
To set the time in standby mode, press and
hold »CLOCK« for about 2 seconds.
– Display: »24 HOUR«.
2
Select the hour format (12 or 24 hours) by
pressing »
­
3
firm with »CLOCK«.
– The hours flash.
3
Set the hours by pressing »
»
« and confirm with »CLOCK«.
4
– The minutes flash.
4
Set the minutes by pressing »
« and confirm with »CLOCK«.
– Display: the current time.
28­
ENGLISH
­ - --------------------------------------------------------------------------------------------------------------------------------------
« or »
« and con-
4
­
« or
3
­
« or »
3
Setting­the­alarm
1
To set the alarm in standby mode, press and
hold »ALARM« for about 2 seconds.
– Display: »TIMER«.
2­The alarm programs displays; »disc«, »USB«
or »TuneR«. Press »
»
« and confirm with »ALARM«.
4
– The hours flash.
3
Set the hours by pressing »
»
« and confirm with »ALARM«.
4
– The minutes flash.
4
Set the minutes by pressing »
4
« and confirm with »ALARM«.
– The volume flash
The volume displays »VOL 12«. Select the vol-
ume with »
firm with »ALARM«.
– The volume can be selected »VOL 01« to
»VOL 31«.
The symbol "TIMER" will then display down on
the right screen to confirm the programming of
the alarm.
Notes:
If you want to disable the alarm, press once
7
ALARM
the "
"TIMER" will disappear from the screen.
­
« or
3
­
« or
3
­
3
­
« or »
« and con-
3
4
" button and the symbol
« or »
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

M 1000 btM 1000 bt w

Table des Matières