Insert handgrip on the handle.
Insert the handle (item 1) through the support (item 2)
as shown.
Install the handle on the control rod (item 3) as shown
and secure with a 2.5 mm. hair pin (item 4.
VERIFY TIRE PRESSURE:
Attachments should raise 3" to 4" above the ground
(no more, no less) if not, check and adjust tractor tire
pressure as follows:
Front tires:
Back tires:
Tire pressure must be even on both sides of the
tractor.
ASSEMBLY
14-15 psi
7-8 psi
13
Install handle