Hamilton Beach 33861 Mode D'emploi page 6

Flex Cook Mode
Use Flex Cook when you want to program two different heat and time settings before the unit switches automatically to WARM.
1. Press to turn on. NOTE: If
no setting is selected in
30 seconds, the unit will turn off
automatically.
5. Press the up or down arrow
to set the timer. The timer
can be adjusted in 30-minute
increments.
6
2. Press FLEX COOK.
6. Press ENTER.
IMPORTANT: NEVER lock clips during cooking. Only use wire
clips to secure lid when transporting.
3. Press the up or down arrow to
select Flex Cook 1 heat setting.
7. Press the up or down arrow to
select Flex Cook 2 heat setting.
4. Heat setting will flash for
5 seconds before flashing
"00:00" is displayed.
8. Heat setting will flash for
5 seconds before flashing
"00:00" is displayed.