Canceling The Display Demonstrations; Setting The Clock - JVC KD-G110 Manuel D'instructions

Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: DEMO ON]—see page 14.
1
2
3
4
Finish the procedure.
To activate the display demonstration
In step 3 above...

Setting the clock

1
2
Set the hour and minute.
1
Select "CLOCK H" (hour), then
adjust the hour.
2
Select "CLOCK M" (minute),
then adjust the minute.
3
Finish the procedure.
To check the current clock time when the
power is turned off
7