Canceling The Display Demonstrations; Setting The Clock - JVC KD-LH911 Manuel D'instructions

Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: Demo]—see page 34.
1
Enter the PSM menu (see page 5).
2
Select "Off."
• Make sure "Demo/Link" is shown
on the display. If not, press
3
Exit from the setting.
To activate the display demonstration
In step 2 above, select "Demo" or
"Image Link." For more details, see page 34.
1
Enter the PSM menu (see page 5).
2
Set the hour, minute, and clock
system.
1 Select "Clock Hr" (hour), then
adjust the hour.
2 Select "Clock Min" (minute), then
adjust the minute.
3 Select "24H/12H," then select
5 ∞
or . "24Hours" or "12Hours."
3
Exit from the setting.
To check the current clock time when the
power is turned off

Setting the clock

9