emerio TFN-214472.1 Mode D'emploi page 7

OPERATION
1. Insert the plug into a suitable power outlet. Press the power switch to position "I". The appliance is in standby
mode.
2. To turn on and off:
Press the on/off button on the control panel the buzzer will beep once and the appliance will start running.
Press and hold the on/off button for 2 seconds the buzzer will beep twice and the appliance will stop running
after you release your hand.
3. To switch to the warm mode:
The appliance starts working in cool mode by default; it sends out the cool air. Press the warm mode button
on the control panel to enter the warm mode; the appliance starts sending out the warm air. The digital
display shows the ambient temperature. Press the button again to exit the warm mode.
4. To set the air volume:
When the appliance is in operation press the on/off button on the control panel to adjust the air volume
from 1 to 9 under cool mode; adjust the air volume from 1 to 4 under warm mode.
5. To set the oscillation function:
Press and hold the on/off buton on the control panel for 1 second the buzzer will beep once and the
appliance will start oscillating. Press and hold the on/off button for 1 second again the buzzer will beep once
and the appliance will stop oscillating.
To use the remote control:
This unit has a remote control. Please use 2x1.5V AAA batteries for this remote control. Please insert the batteries
to the remote control tightly. If it is not in use for a long time, please take the batteries out of the remote control.
Note: Most functions of the appliance can only be controlled by remote control. If you have lost the remote
control or if it is damaged, please contact our customer service.
The remote control should be pointed at the signal receiver on the digital display to maximize the remote control
signal. Effective distance: 4M
- 6 -