Arzum OKKA OK001 Mode D'emploi page 23

Troubleshooting
PROBLEM
Appliance interrupts
during a boiling or
self-cleaning process.
Power failure.
All warning LEDs are
flashing accompanied by
an acoustic signal.
Technical data
Rated voltage :
220-240 V ~
Rated frequency :
50-60 Hz
Rated power
710 W
input :
CAUSE
The water chamber
is empty.
The water chamber is
removed.
The brewing head is
removed.
The waste water
tray is full.
The waste water tray is
removed.
The unit is off after
a power failure in
the mains supply.
Technical fault in
the appliance.
Informations de contact
http://www.arzumokka.com/Home/Contact
0850 222 1 800
SOLUTION
Fill the water chamber with fresh cool water.
Insert the clean and filled water cham-
ber into the appliance.
Apply the brewing head to the appli-
ance.
Empty and clean the waste water tray.
Insert the clean waste water tray into
the appliance.
Switch the appliance on by use of
the On/Off switch at the back of the
appliance. The appliance is performing
a self-test afterwards. It can be reused
once all LEDs are on.
Restart the appliance. If problem per-
sists, please contact the Arzum OKKA
customer service.
EN
ARZUM OKKA 23