Washer Symptom
Er, SL on digital display
Sr, cycle time remaining on digital display
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
All manuals and user guides at all-guides.com
• This code will be displayed after a cycle for one minute, or
• Laundry load may be oversudsing. Make sure you are us-
• Laundry load may be overloaded. Make sure you are using
• The control has detected an oversudsing condition and is
31
Possible/Cause Solution
until the Power/Cancel keypad is pressed, and indicates
an oversudsing condition.
ing low sudsing, high efficiency (HE) detergent. If using
non-HE detergent, use only 1/2 of the detergent manufac-
turer's recommended amount.
proper load sizes.
running a special routine to remove the excess suds.
Troubleshooting
Part No. 806974EN