Troubleshooting - Speed Queen SF7001WE Guide De L'utilisateur

Troubleshooting

Try these troubleshooting tips before making a service call.
They may save you time and money.
Washer Symptom
Won't Fill
Won't Start
Won't Spin/Tumble
Stops/Pauses During Cycle
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
All manuals and user guides at all-guides.com
• Make sure power cord is plugged all the way into the elec-
• Make sure hot and cold water faucets are turned on.
• Make sure that the fill hoses are not kinked or twisted.
• Press Start/Pause button to start washer.
• Make sure that the controls are properly set.
• Make sure that the loading door is closed tightly.
• Check the laundry room fuse or circuit breaker.
• Clean the screens in the water mixing valve and the filter
• Make sure that the loading door is closed tightly.
• Press Start/Pause button to start washer.
• Make sure power cord is plugged all the way into the elec-
• Make sure that the controls are properly set.
• Check the laundry room fuse or circuit breaker.
• Make sure door latch is properly adjusted relative to door
• You will not be able to press the Start/ Pause button to
• Make sure that the loading door is closed tightly.
• Press Start/Pause button to start washer.
• Make sure power cord is plugged all the way into the elec-
• Make sure that the controls are properly set.
• Check the laundry room fuse or circuit breaker.
• Broken drive belt. Call the service person.
• Foreign object trap in pump may be clogged. Clean the
• Pauses are part of the washer's normal operation.
• Check the laundry room fuse or circuit breaker.
• Wash load may be unbalanced. Washer will stop and then
27
Possible/Cause Solution
trical outlet.
screens located at the faucet end of the fill hoses. (Owner
is responsible for service calls regarding cleaning of the
screens.)
trical outlet.
lock.
start a cycle until five seconds after turning on the washer.
A status light will flash during this warm-up period.
trical outlet.
trap. Refer to Maintenance section.
restart spin automatically. If the washer is severely unbal-
anced, press the Start/Pause button and redistribute the
load.
Troubleshooting
Table continues...
Part No. 806974EN