Out Of Balance Load - Speed Queen SF7001WE Guide De L'utilisateur

ric being washed, you may change the cycle selection at
any time until the first wash fill is complete.
NOTE: The Normal Eco cycle is recommended for
everyday cottons and linens.
7. If desired change the Selections and Options settings.
8. Press the Start/Pause button to begin the cycle. The Door
Lock light will come on after a short delay and the cycle will
begin.
NOTE: If the door is open when trying to start a cy-
cle, the display will show "do" and cycle time (1
second on/1 second off).
If items need to be added or removed after a cycle has star-
ted, press the Start/Pause button. After the door unlocks and
the Door Lock light goes out, open the door to add or remove
laundry.
While a cycle is paused, the display will show the cycle time re-
maining and St to restart the cycle. Close the door and press
the Start/Pause button to resume the cycle.
The Door Lock light will flash while the door re-locks.
NOTE: If water needs to be removed before opening
the door, run a Spin cycle to pump water out of the
washer.

Out of Balance Load

If at the end of the cycle the load is dripping wet, the washer
has limited the spin speed. This is to prevent damage to the
unit if there is a severely unbalanced load.
If this condition occurs, redistribute the load manually and run
a SPIN cycle.
If the condition persists, consider steps discussed in the Be-
fore Washing section.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
All manuals and user guides at all-guides.com
15
Control Panel
Part No. 806974EN