EN
3. Getting Started
3.1. Insert a SIM card
To use your phone, you need to insert a valid SIM card to connect
to the GSM network.
To avoid missing or damaged the contents of the SIM card, please
DO NOT hold the metal part of the SIM card with your hands free
and keep it away from electromagnetic devices. If the SIM card is
damaged, it can not be connected to the GSM network. Before
inserting or removing the SIM card, make sure that the device is
turned off and removed from the back of the device.
Note: Locate the SIM card slot on the back of the device and in the
direction of the signal, with the collisions slide the card.
3.2. Insert a memory card
The internal memory of the device is 32 MB. You need to insert a
memory card to store multiple multimedia files (such as photos,
music) or send and receive MMS. The memory card is not part of
the basic package. Up to 16GB memory cards can be used. Slide in
the memory card with the chip part down in the bay with the
memory card slot.
3.3. Insert battery
To insert the battery, slide the back cover down and remove it.
Align the gold-colored contacts of the battery with the contacts on
the device and gently snap the battery into its place. Replace the
back of the device.
With the recess on the top two sides of the battery holder, you
can unplug the battery if you want to remove it.
3.4. Remove the battery
To remove the battery, turn off the device, remove the cover, and
then remove the battery.
Note: Please remove the battery when it is switched off, as it may
3