Baninni Home FORIANO BN151 Mode D'emploi page 13

All manuals and user guides at all-guides.com
Step 2.
Open the baby walker in the in-use position, ensuring that all wheels touch
the floor. Slowly raise the tray by pulling it in an upward direction, until a
click indicates that the frame has been locked correctly in one of the three
positions.
Step 3.
Place the rearview mirrors and decorative wheels in the appropriate housings.
Ensure that the decorative wheels are firmly pushed all the way into the
housing on the up base of the walker.
Step 4.
Insert the plastic rings of the padded seat in the slots located along the upper
edge of the walker frame. Pass the rings through the slots and tug them until
they clear the passage, then release them, ensuring that they are correctly
locked in the position and cannot recede into the slot.