Franke PROFESSIONAL SEMI PRO FF5 300 Manuel D'installation page 7

9. Connect the Flexible Supply
Hoses (13) to the water supply
in the home (fig. 2D).
2D
13
10. Remove Aerator (14) using the
Aerator Key (15) (fig. 2E).
2E
14
15
12. Turn on water, flush the faucet and
Aerator (14) to remove any debris and
check for leaks (fig. 2F).
13. Reinstall the Aerator (14) and ensure
everything is functioning properly.
ATTENTION: For FFPD5300 Series
8. NOTE: Secondary spout is NOT
secured to allow for better transportation.
Align the secondary spout parallel to the
main spout as shown in image 3A.
3A
13
2F
14
– 7 –
Take the set screw attached to the
warning card and insert it into the back
of the body under the spout, and tighten
it with the hex key also attached to the
warning card (fig. 3B).
3B
The secondary spout rotation is
approximately 100 degrees to prevent it
from hitting the main spout (fig. 3C).
3C
9. Connect Stainless Steel Mixed
Water Supply Hose (8) to the top of the
Diverter (10) (fig. 3D).
3D
7
8
100°
9
10
EN