Using Your Appliance; Temperature Control And Adjustment; Thermostat Setting Button - Beko RSSE265K30WN Manuel D'utilisation

5

Using your appliance

Temperature Control And Adjustment

The operating temperature is regu
lated by the temperature control.
Warm
1 2
(Or) Min.
1=Lowest cooling setting
(Warmest setting).
5=Highest cooling setting (Coldest
setting).
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according
to the desired temperature.
Please note that there will be
different temperatures in the cooling
area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also
depends on ambient temperature,
the frequency with which the door is
opened and the amount of foods kept
inside.
Warm
1 2
(Or) Min.
Cold
3 4 5
Max.
Cold
3 4 5
Max.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.

Thermostat setting button

The interior temperature of your
refrigerator changes for the following
reasons;
Seasonal temperatures,
Frequent opening of the door and
leaving the door open for long
periods,
Food put into the refrigerator
without cooling down to the room
temperature,
The location of the refrigerator in
the room (e.g. exposing to sunlight).
You may adjust the varying interior
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
If the ambient temperature is higher
than 25°C, turn the thermostat
button to maximum position.
If the ambient temperature is lower
than 25°C, turn the thermostat
button to minimum position.
18
EN