Polaris 2878670 Mode D'emploi page 2

SPORTSMAN REAR BUMPER
KIT PN 2878670
Applications:
All 2011 Sportsman 400/500/800 except 500 Touring and 6x6
Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these
installation instructions for future reference and parts ordering information.
This kit contains:
Qty Part Description
1 Rear Bumper
4 5/16"-18 x 3/4" Self-tapping Screw
Tools Required: Standard socket set
IMPORTANT: Your Polaris Sportsman Rear Bumper is designed exclusively for your vehicle. Please read the
installation instructions thoroughly before beginning. For your safety and to ensure a satisfactory installation,
perform all installation steps correctly and in the sequence shown. Installation is easier if the vehicle is clean and free
of debris.
Approximate Installation Time: 10 minutes
INSTALLATION INSTRUCTIONS
1. Position bumper in place on rear of vehicle. Locate holes in frame that match bumper mounting holes.
2. Install (4) self-tapping screws using standard socket set. Tighten screws until snug. Over-tightening of self-
tapping screws can result in stripped threads in the frame.
7515164-418E
A-7515164
- 1 -
Imprimé en Chine / Printed in China