Operation; Querying Grohe Sense Data - Grohe SENSE 22 505 Mode D'emploi

10.Change to WLAN settings on mobile
11.Select GROHE Sense network and connect
SSID: GROHE_SENSE
Sensor password: see nameplate on bottom of the
GROHE Sense
12.Change back to the GROHE app and connect the
GROHE Sense to the private wireless network
(The wireless network must have permanently active
Internet access)
13.Enter and confirm wireless password
14.SETUP SUCCESSFUL is shown on successful
connection
The GROHE Sense is now registered in the GROHE
ONDUS app and connected to the cloud.
The room temperature and humidity are recorded
at 60 minute intervals and cached in the sensor.
Transmission of the data saved in the GROHE Sense to
the cloud takes place every 24 hours between 03:00
and 04:00 local time.

Operation

Querying GROHE Sense data

1. Touch the GROHE ONDUS app icon to start the
application and, if necessary, log on
2. Select product
3. Measured data transmitted to the cloud are shown
The time of the last synchronisation of the app with the
cloud, the last saved values for room temperature and
humidity in addition to the GROHE Sense WLAN
connection and battery status are shown.
You can select the display period by swiping from right to
left (CURRENT/WEEK/MONTH/3 MONTHS).
Content
23