Technical Data; Operating Conditions; Apple; Android Tm - Grohe SENSE 22 505 Mode D'emploi

ONDUS

Technical data

• Relative humidity:
• Temperature range:
• Sound pressure level:
• Batteries:
The GROHE Sense complies with the following EU
directives:
• RoHS 2011/65/EU
• LVD 2014/35/EU

Operating conditions

Apple

• operating system iOS 9.0 and higher
TM
Android
• operating system 4.3 and higher
• recommended pixel density minimum 160 dpi
• resolution minimum 320 x 470 pixels

Current application

The current version of the app (GROHE ONDUS) must
be installed on the mobile, see initial installation.

Function range

• Flood monitoring
• Humidity and temperature monitoring

Connection settings

• The GROHE Sense must be connected to a wireless
network with continuous Internet access.
• GROHE Sense password: see nameplate on the bottom
• Internet access must be permanently enabled on the
mobile (Settings/ mobile data/ on)
• The GROHE Sense must be registered in the GROHE
ONDUS app.
When operating under unfavourable surrounding
conditions, in rooms with reinforced concrete walls, steel
and iron frames or in the vicinity of obstacles
(e.g. furniture) made of metal, WLAN reception can be
impaired and interrupted.
Type of barrier
Wood, plastic, glass
Water, bricks, marble
Plaster, concrete, solid wood
Metal
The GROHE Sense works in frequency band 2.4 GHz.
Installation in the vicinity of devices with the same frequency
band (e.g. DECT telephones, Bluetooth devices etc. [observe
manufacturer documentation!]) should be avoided.
Content
0 – 100 %rH ±5.0 %rH
0 – 45 °C ± 1 °C
≥50 db @ 3 m
3 x type Micro 1.5 V (AAA, LR03)
• EMC 2014/30/EU
• RED 2014/53/EU
Interference or screening
potential
Low
Medium
High
Very high
20