Starting The Grohe Ondus App; Add Grohe Sense To The Network - Grohe SENSE 22 505 Mode D'emploi

Starting the GROHE ONDUS app

Touch the app icon to start the application
Log on and Registration:
• With an existing Google or Facebook account
• With a new Google or Facebook account
• With a GROHE account
• The GROHE ONDUS app requires acceptance of the
conditions of use!
• Connection to the cloud is set up automatically
• Main screen (dashboard) is shown

Add GROHE Sense to the network

Follow the instructions on the app.
1. Create a new house
(state address and contact information,
Caution: do not use special characters!)
2. Install new device (GROHE Sense)
3. Issue device name
(Caution: do not use special characters!)
4. Create a new room
5. Set standard environmental parameters
(damp/dry/upper temperature monitoring)
6. Open housing upper section by turning to the left
7. Insert batteries, ensure correct polarity while doing so
8. After the batteries have been inserted the GROHE
Sense is in configuration mode and the interior LED
blinks blue
Important note
Configuration mode is active for a maximum of 5 minutes.
Once 5 minutes have expired, the mode can be reactivated
by briefly removing the batteries (min. 30 seconds).
Caution
Direct light can be harmful to the eyes
To avoid eye damage, do not look directly at the light
source.
9. Close housing upper section by turning to the right
Content
22