User Modes - endolite Orion3 Guide De L'utilisateur

5 User Modes

The Orion3 has 2 User Modes. Please note that these modes are only available if they
have been enabled by your practitioner.
Warning:
Care must be taken to only use those modes as instructed by your practitioner.
1 Flexion Lock
Sets the limit of flexion to a predetermined angle.
The maximum lock angle is 45 degrees from fully extended.
2 Cycling (Free swing)
Releases stance resistance, the Orion3 knee will then swing freely.
Warning:
In Cycling Mode there is no stance control active, this mode must be de-activated
before resuming walking to avoid falling and possible injury.
Flexion Lock Mode
User activation of Flexion Lock Mode with
To activate Flexion Lock:
Fully extend the knee.
Press the button 3 times, a short beep confirms each button press, 3 short beeps
confirm that Flexion Lock is ON.
To de-activate Flexion Lock:
Press and hold
Cycling Mode
Warning:
In cycling (free swing) mode there is NO stance resistance.
User activation of Cycling Mode with
To activate Cycling Mode:
Press the button 4 times, a short beep confirms each button press, 4 short beeps
confirm that Cycling Mode is activated.
To de-activate Cycling Mode:
Press and hold
you will hear 2 long beeps.
you will hear 2 long beeps.
button on the Orion3 knee
button on the Orion3 knee
8
938375/1-0816