Philips TT3003 Mode D'emploi page 27

Masquer les pouces Voir aussi pour TT3003:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 81
Problem
The skin feels more
sensitive than normal
during treatment.
I experience an
unacceptable pain
sensation when I use the
appliance.
Cause
You have not shaved the area
to be treated properly.
You stored the appliance in a
dusty environment.
The light intensity you use is
too high.
You did not shave the areas
to be treated.
The filter glass in the light exit
window is broken.
The appliance is defective.
You did not shave the areas
to be treated.
You treated an area for which
the appliance is not intended.
You have used a light
intensity which is too high for
you.
The UV filter of the light exit
window is broken.
The appliance is not suitable
for your skin colour.
Solution
If there are hairs on the area to be
treated, these hairs may get burnt when
you use the appliance. As a result, you
notice a strange smell. Shave the area
to be treated properly before you use
the appliance. If shaving causes skin
irritation, trim hairs as short as possible
and use a comfortable setting.
The strange smell disappears after a few
flashes.
Check if you have selected the right light
intensity. If necessary, select a lower light
intensity.
Shave the areas to be treated before you
use the appliance. If shaving causes skin
irritation, trim hairs as short as possible
and use a comfortable setting.
If the filter glass in the light exit window
is broken, do not use the appliance
anymore. Contact the Consumer Care
Centre in your country, your Philips
dealer or a Philips service centre.
Contact the Consumer Care Centre in
your country, your Philips dealer or a
Philips service centre.
Shave the areas to be treated before you
use the appliance. If shaving causes skin
irritation, trim hairs as short as possible
and use a comfortable setting.
Only use the appliance on the underarms,
pubic area (excluding the scrotum),
shoulders, chest, back and legs.
Reduce the light intensity to a level
that is comfortable for you. See chapter
'Preparing for use', section 'Setting the
light intensity'.
If the UV filter of the light exit window
is broken, do not use the appliance any
more. Contact the Consumer Care Centre
in your country, your Philips dealer or a
Philips service centre.
Do not use the appliance if you have a
very dark skin. Do not use it either if your
body hair is light blond, red, grey or white.
English
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tt3003/61

Table des Matières