Charging; Preparing For Use; Preparing Treatment Areas - Philips TT3003 Mode D'emploi

Charging

Preparing for use

Preparing treatment areas

Fully charge the batteries before you use the appliance for the first time and
when the batteries are empty. Fully charging the batteries takes up to 1 hour
and 40 minutes.
Charge the appliance when the charging light lights up orange during use to
indicate that the battery is low and will run out soon.
Fully charged batteries provide at least 370 flashes at light intensity 5.
Fully charge the appliance every 3 to 4 months, even if you do not use the
appliance for a longer time.
Charge the appliance in the following way:
1 Switch off the appliance.
2 Insert the small plug into the appliance and put the adapter in the wall
socket.
-
The charging light flashes green to indicate that the appliance is
charging.
-
When the batteries are fully charged, the charging light lights up green
continuously.
Notes:
-
The adapter feels warm during charging. This is normal.
-
You cannot use the appliance during charging.
-
This appliance is equipped with battery overheat protection and does
not charge if the room temperature exceeds 40°C.
Never cover the appliance and adapter during charging.
3 After charging, remove the adapter from the wall socket and pull the
small plug out of the appliance.
For optimal results and greatest effect, prepare the areas on which you
intend to use the appliance in the manner described below.
1 Always shave the areas you intend to treat before you use the Lumea
Plus for men. The Lumea Plus for men can only be used on a shaved skin.
Note: Philips recommends that you use the Philips Bodygroom included
in the package to preshave the areas to be treated with the Philips
English 13