Control Panel; Front Panel Functions; Temperature Setting - Hoshizaki Advance Serie Manuel D'utilisation, D'entretien Et D'installation

Advance

CONTROL PANEL

The control panel provides the following controls and functions:
1. SET key
•
Use to enter/set input values
2. ON/OFF key
•
Hold down for 4 seconds to turn the cabinet on or off
3. DOWN key
•
Use to scroll down through the menu or to change/reduce the value
4. UP key
•
Use to scroll up through a menu or to change/increase thevalue
•
Hold down for 4 seconds to start MANUAL DEFROSTING

FRONT PANEL FUNCTIONS

The control panel can be locked andunlocked.
To lock the controls:
• Ensure that no procedure is in progress
• Do not operate for 30 seconds
• The display will show "LOC" for 1 second and the keyboard will lock automatically
To unlock the controls:
• Touch a key for one second: the display will show the message "UNL" for one second

TEMPERATURE SETTING

1.
Ensure that the control panel is not locked and that no procedure is on progress.
2.
Touch the SET key, the * LED will flash.
3.
Change the temperature setting by the use of the UP and DOWN arrows.
4.
Touch the SET key or do not operate for 15 secs. The * LED will stop showing and the
controller will exit this procedure.
5.
To exit the temperature setting procedure before it is complete.
a. Touch the ON/OFF key (any changes will not be saved). The working set point can also be
set via the SP parameter.
1
2
3
EN
4
7