3
3
1
2
0.6 Nm
0.74 ft. lb.
CAUTION! Danger of short circuit by loose metal parts from knockouts. Loose
metal parts in the inverter may cause short circuits when the inverter is powered
up. When removing knockouts, make sure that
-
no loose metal parts fall into the inverter,
-
any metal pieces that do fall into the inverter are removed immediately.
1
4
1
NOTE! In order to ensure tightness, when the antenna screw joint is set into the
inverter housing, the sealing ring must be attached to the antenna screw joint.
1
5
2
19 mm
3/4 in.
2
6
!
!
1
1
43