VINCENT STU-8 Manuel D'utilisation page 28

11
11. ANTENNA:
FM-antenna terminal
Connect a coaxial antenna cable for the FM
reception of the radio part If no Antenna-wall con-
nection exists, an Indoor antenna or the supplied
wire for antenna can be used.
DAB-antenna terminal
Connect the supplied telescopic antenna at room.
12. Analog output RCA / XLR jacks
These jacks can connect the amplifier with RCA /
XLR jacks. Over Line-level connections, the STU-8
can be connected to an amplifier, preamplifier, etc.
Vincent
28
REAR VIEW
12
13. POWER CONTROL (12V) OUTPUT
Over this jack (3.5 mm), the power control sig -
nals (trigger) are produced.
14. 230V/AC-Power socket
Attach the power cable and connect It with the
power supply
13 14