Adding Rinsing Agent - Miele professional PG 8057 TD Mode D'emploi

en - Adding rinsing agent

Adding rinsing agent

Open the door fully.

Unscrew the lid of the rinsing agent con-

tainer.
Add rinsing agent only until it is up to the

maximum mark on the edge of the funnel
on the container.
The container holds approx. 300 ml.
Screw the lid of the rinsing agent con-

tainer back on tightly so that water cannot
get into the container during the wash
cycle.
Run the "Cold" programme to rinse away

any spilled rinsing agent. This prevents
over-foaming occurring during the next
programme.
34