Electrical Connection And Safety - Burg BEB151-RC Manuel D'utilisation

Installation in a wall unit
• After making the electrical connections,
insert the oven into the cabinet by
pushing it forward. Open the oven door
and insert 2 screws in the holes located
on the oven frame. While the product
frame touches the wooden surface of
the cabinet, tighten the screws.
If the oven is installed under a hob:
• The distance between the worktop and
the top panel of the oven must be a
minimum of 50 mm and the distance
between the worktop and the top of
control panel must be a minimum of 25
mm.
Worktop
min. 25 mm
min.
50 mm
K
F
I H
G
J
Hob
Oven
A
E
D
J
• The distance between the base of
the hob and the top panel of the oven
must be a minimum of 10 mm for air
circulation.

2.3. Electrical Connection and Safety

WARNING: The electrical connection
of this appliance should be carried out
by an authorised service person or
qualified electrician, according to the
instructions in this guide and in compliance
with the current local regulations.
WARNING: THE APPLIANCE MUST
BE EARTHED.
• Before carrying out the connection to
the power supply, the voltage rating
of the appliance (stamped on the
appliance identification plate) must be
checked for correspondence to the
available mains supply voltage, and the
mains electric wiring should be capable
of handling the appliance's power rating
(also indicated on the identification
plate).
EN - 769
B
C
C
min.
10 mm