Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Content:
1.
Introduction
2.
Instructions for use
3.
4.
5.
6.
7.
8.
9.
10.
11.
Picture attachements
CleanAIR® - powered air purifying systems for protection of a respiratory tract.
1. Introduction
CleanAIR® is a personal respiratory tract protection system based on overpressure of filtered air in the
respiration zone. The powered air purifying respirator unit transports the air from the surrounding envi-
ronment through the filter and then supply the protection hood or mask. Resulting overpressure prevents
contamination from passing into the respiration zone. At the same time the light overpressure ensures
high user comfort even when worn for a long time with no need to overcome inhalation resistance of the
filter.
2. Instructions for use
Read carefully and observe the instructions stated in the „User manual". The user must have perfect
knowledge of how to use the protective equipment correctly.
•
CleanAIR® D-Bug must not be used when the unit is switched off!
•
CleanAIR® D-Bug must not be used when the unit is bringing insufficient amount of air.
•
CleanAIR® D-Bug must not be used in areas where oxygen concentration is below 17 %.
•
CleanAIR® D-Bug must not be used in areas where the user has no knowledge of the nature of contami-
nation or its concentration.
•
CleanAIR® D-Bug must not be used in areas where there is risk of explosion or fire.
•
CleanAIR® D-Bug must not be used in confined spaces, such as closed tanks, tunnels, sewers.
•
Before each use of the always check with the enclosed flow indicator, whether airflow is within the limits.
(see Article 4 „Before first use" -> „Airflow test")
•
If, for any reason, the filtration unit stops working, the user must leave the contaminated space without delay.
•
Mask must fit to face tightly to ensure perfect protection level of the wearer. If beard or long hair gets in
way along the sealing outline, this may impair the protection level provided by the system.
•
PAPR unit CleanAIR® D-Bug filtration unit is normally supplied with combined filter A1B1E1P R SL.
•
Filters designed to capture solid and liquid particles (particle filters) do not protect the wearer against
any gases.
•
Filters designed to capture gases do not protect the wearer against any particles.
•
Always replace the filters, when you notice a change in the smell of air coming from the unit.
•
Only use original certified filters designed for your PAPR CleanAIR® D-Bug.
NOTICE! When any of the instructions for use of the filter is broken, the warranty is invalid!
4
ENG
Publicité
Table des Matières
