Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT INSTALLATION (cont.)
STEP 2: FAUCET INSTALLATION
Top Spout
Top Cap
Main Body
Escutcheon
Lock Washer
1. Unpack the faucet and insert the Top Spout into the Main
Body by pushing down until inserted then screw the Top Cap
clockwise until secured in place.
2. Cut zip tie on the blue water connection tubing and unroll
to straighten tubing. Be careful not to cut the tube when
removing the zip tie.
8
LED Indicator
Battery Seat
CR2032
Battery
Counter Top
Plastic Washer
(raised area faces down)
Locking Nut
1/4" Tube
(connected to faucet)
Before Installation
You will need an existing faucet hole at least 7/16
inches in diameter in the sink or countertop to install
the supplied filtered water faucet. You may also
replace an existing kitchen sprayer, soap dispenser,
or plug already on the countertop or sink.
If drilling a new hole is required for the
faucet installation, please consult a
professional. Brondell will not be liable for
any damages including those to the sink
or countertop due to installation of the
faucet or drilling a hole.
For California Residents: CR2032
batteries contain Perchlorate Material -
special handling may apply. Visit http://
www.dtsc.ca.gov/hazardouswaste/
perchlorate for more information.
Please find answers to Frequently Asked
Questions (FAQs) and installation videos
on brondell.com
Publicité
Table des Matières
