Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT INSTALLATION (cont.)
STEP 3: FILTER HEAD CONNECTION ASSEMBLY INSTALLATION
1. Attach the two Quick Connect 90° Elbows to back side of the Connection Assembly Inlet and
Outlet as shown
Be sure to install the Filter Head Connection Assembly so that the top of the assembly
is at least 14 inches from the floor of the sink cabinet. Otherwise the filters will not
install or seat correctly.
2. Using a pencil, mark where the Filter Head Connection Assembly will be mounted to the
sidewall of the cabinet (at least 14" from the cabinet floor). Use a level to make sure that the
Assembly will be mounted straight.
NOTE: Before you mount the Connection Assembly, it may be a good idea to practice inserting
and removing the filters.
3. Insert the two mounting screws through the holes in the Assembly frame and screw into the
cabinet sidewall.
10
Publicité
Table des Matières
