Use Instructions; Control Board - Teka TGF 390 NF Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39

4. USE INSTRUCTIONS

CONTROL BOARD

In the first power-on, your appliance is set to -18°C. After that, every time you start the fridge,
it will run in accordance with the memorized temperature.
When the door is under open state, the display will shine all the time and it will stop shining
thirty seconds after the door is closed or key operation.
Start-up and shutdown
To turn on or off the freezer, press for 3 seconds, the setting button
Under shut down mode, all the keys will stop responding, and compressor, except ON/OFF
key (B key).
Temperature adjustment
To adjust the temperature of your freezer, you must press the setting button
at the same time. The temperature will flash, you can then set the temperature between
-16 and -24 ° C.
Once you have selected the desired temperature, 5 seconds later, the freezer will set to the
desired temperature. The selected temperature icon lights up. You can also validate your
choice by pressing one of the 2 keys:
Fast freezing mode
To enter fast freezing mode, press the SET key
The freezing mode icon will be displayed:
By pressing this function, your freezer will operate at a temperature of -24°C. The display
screen will show the defaulting quick-frozen time (6 hours). Press temperature regulation keys
or
to change quick-frozen time. Adjustment range is between 6 hours to 48 hours.
or
.
for 3 seconds.
33
.
and

Publicité

Table des Matières
loading

Table des Matières