GE JX1527 Mode D'emploi page 3

❒
INSTALL BOTTOM DUCT ASSEMBLY
3
TO MICROWAVE OVEN
Fasten the anti-tip bracket to the bottom duct
A
using four round-head screws.
Bottom Duct
REAR
Anti-Tip
Bracket
Round-Head
Screws (4)
Install the rear duct to the bottom duct with
B
one round-head screw.
Rear Duct
Remove all loose items, including the turntable
C
and turntable support, from the microwave
oven. Carefully turn the oven upside down.
Remove one screw from microwave oven
cabinet. Place the bottom duct assembly on
the microwave oven bottom and fasten with
six round-head screws and the screw just
removed from the microwave oven. Turn the
microwave oven right side up, being careful
not to bend the bottom duct flange.
Round-Head
Screws
Round-Head
Screws (4)
Installation Instructions
FRONT
Round-Head Screw
Screw from
microwave oven
Microwave oven
upside down
❒
INSTALL UPPER DUCT AND TOP
4
BRACKET
Remove two screws from back of the
A
microwave oven. Peel off the adhesive backing
from the upper duct and secure it to the
microwave oven by pressing it firmly down
on duct. Fasten the upper duct with the two
screws just removed from the microwave oven.
Screws
from
microwave
oven
Place the top bracket on top of the upper
B
duct, with the opening on the top bracket
lined up with the opening on the duct. Attach
the top bracket to the upper duct using two
round-head screws.
❒
INSTALL MICROWAVE OVEN
5
INTO CABINET
A Slide the microwave oven part way into the
cabinet opening.
Plug in the
B
microwave
oven.
Anti-Tip
Brace
The anti-tip
C
bracket
must be
flat to the
cutout floor to engage correctly with the
anti-tip brace as shown. Carefully slide the
microwave oven back, engaging the anti-tip
brace. Make sure the power cord is not
mashed or cut as you slide the microwave
into place.
Center the microwave oven within the cutout
D
opening.
3
Round-Head
Screws
Anti-Tip
Assembly
Bottom Duct
Anti-Tip
Bracket