Care And Maintenance; Battery Maintenance - K2 Pumps SPC03301K Manuel Du Propriétaire

10. Once all wiring is complete, fill your pit with water and verify that the primary pump removes the water and the
backup pump doesn't run. Then, unplug your primary pump and refill your pit with water. Verify that the backup
pump removes the water.
OPERATION
WARNING: Risk of electric shock. Can shock, burn or kill. Do not handle a pump or pump motor with wet
hands or when standing on wet or damp surface, or in water.
1. Shaft seal depends on water for lubrication. Do not operate pump unless it is submerged in water as seal may
be damaged if allowed to run dry.
2. Motor is equipped with automatic reset thermal protector. If temperature in motor should rise, switch will cut off
all power before damage can be done to motor. When motor has cooled, switch will reset automatically and
restart motor. If protector trips repeatedly, pump should be removed and checked. Low voltage, long extension
cords, clogged impeller, very low head or lift, or a plugged or frozen discharge pipe, etc., could cause cycling.
3. Pump will not remove all water. If operating a pump manually and suddenly no water comes out of the
discharge hose, shut off the unit immediately. The unit has broken prime due to a very low water level.
WARNING: Risk of electric shock. Can shock, burn or kill. Before attempting to check why unit has stopped
operating, disconnect power from unit.

CARE AND MAINTENANCE

To prevent serious injury from accidental operation, unplug the pump from its electrical outlet before performing
any inspection, maintenance, or cleaning procedures. To prevent serious injury from pump failure, do not use
damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

BATTERY MAINTENANCE

To protect the battery case from chipping and gouging, do not let the battery sit on a concrete floor. Install the
battery on a shelf or protective pad such as plywood. Always install the battery in a dry location that is protected
from flooding. Follow the battery manufacturer's recommendations for maintenance and safe use of the battery.
8 For Professional Technical Support call 1-844-242-2475