FTE Maximal eXtreme HD flex T2 Manuel D'utilisation page 18

QUICK INSTALLATION GUIDE
STEP 2: VASIC CONFIGURATION OF THE RECEIVER
The receiver includes an installation assistant that will help you to
setup the different parameters.
When the receiver is turned on at first time (using the button at
the rear panel of the receiver), the next menu is shown on the
TV:
In order to through the different options of this menu, please use
the buttons of the remote control unit.
OSD Language
: Press the button [VOL+] to show the list of the
OSD language available. Select the OSD language using the
Picure 1
buttons [CH-/CH+]. Press the button [OK] to confirm the
selection.
Country
: Press the button [VOL+OK] to show the list of
countries. Using the keys [CH-/CH+] to choose the country.
Press the key [OK] to confirm the selection.
Time zone
: Set the Time zone of your region. Press the button
[VOL+] to show the list of countries. Using the keys [CH-/CH+]
to choose the Time Zone. Press the key [OK] to confirm the
selection.
Active antenna
: This option allows turns on or off 5V feeding
though coaxial cable. Press [VOL+] and choose the option using
the keys [CH-/CH+]. Press the key [OK] to confirm the
selection.
Picture 2
LCN : If set to on this option the channels will be automatic
sorted by channel numbers received from the operator. Please,
check this option is available in your region.
Start Search
. Before making an auto Search be sure the data of
the Country option (Picture1) is correct, in other case the search
of channels will be made wrongly. Once the coutry option is
confirmed, please select the option Auto search and press [OK].
Please, don't make any action with the receiver until the Auto
Search has finished. (Picture 2)
4 v
English 1.1
´´o