Battery Recharging - Power Fist 2/12/75 A Manuel D'utilisateur

V 4.0
3. Even a discharged battery may still carry a charge. To prevent a shock,
place battery terminal caps or covers over the terminal to prevent
accidental contact. Hold the battery by the bottom if moving the battery to
a different location.
4. Batteries are heavy due to the weight of the lead and liquid contained
inside. A lead acid battery could weigh upwards of 40 lbs. Use safe lifting
methods if moving the battery.

BATTERY RECHARGING

1. Charge batteries in a designated, well-ventilated area to avoid gas buildup.
2. Charge the battery at rates recommended by the manufacturer.
3. Disconnect the charger from its power source before attaching or
removing the clamp connections.
4. Carefully attach the clamps to the battery terminals based on their proper
polarity.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
Contents:
• Battery Charger
IDENTIFICATION KEY
A. Handle
B. Ammeter - The Ammeter
indicates the amount of
current, measured in amps,
that is being drawn by the
battery. As a battery takes on
a charge, it draws less
current from the charger.
Correspondingly, the meter
Visit www.princessauto.com for more information
2/12/75A Battery Charger/Starter 8646077
Fig. 1
7