Control Panel; Use Of The Appliance; Display; Ventilation - Kuppersbusch K Serie Mode D'emploi

Control panel

Control light timer
Timer
key
STOP key

USE OF THE APPLIANCE

Display

Display
0
1...9
U
A
E
H
P
U
II

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the heat
created by the electronic system reaches a certain level. The ventilation starts its high speed
when the hob is intensively used. The cooling fan reduces its speed and stops automatically
when the electronic circuit is cooled enough.
Power selection zone
Designation
Zero
Power level
No pan detection
Heat accelerator
Error message
Residual heat
Booster
Keep warm
Stop&Go
"Slider" and timer
setting zone
Description
The heating zone is activated.
Selection of the cooking level.
No pan or inadequate pan.
Automatic cooking.
Electronic failure.
The heating zone is hot.
The Booster is activated.
Maintain automatically of 70°C
The hob is in pause.
27
Timer Display
Selection zone
key
Power Display
On / Off