Accessories; Service Information - Simpson IR61094 Guide D'utilisation

Masquer les pouces Voir aussi pour IR61094:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Store the machine and accessories in a dry, climate controlled
environment. Do not store the machine or accessories in a place
CAUTION: Risk of personal injury. Avoid placing hands between
handle and frame when assembling to prevent pinching.
NOTICE: Risk of property damage. Always store and transport unit
in an upright position.

ACCESSORIES

Recommended accessories for use with your tool are available for
purchase from your local dealer or authorized service center. If you
need assistance in locating any accessory for your tool, please contact
the FNA Group at www.simpsoncleaning.com, 7152 99th Street,
Pleasant Prairie, WI 53158 or call 1 (877) 362 4271.
DANGER: Risk of fluid injection. When using replacement lances
or guns with this pressure washer, DO NOT use a lance and/or lance/
gun combination that is shorter in length than what was provided with
this pressure washer as measured from the nozzle end of the lance to
the gun trigger.
WARNING: The use of any other accessory not recommended
for use with this tool could be hazardous. Use only accessories rated
equal to or higher than the rating of the pressure washer.

SERVICE INFORMATION

Please have the following information available for all service calls:
Model
Number
____________
Date and Place of Purchase ___________________________________
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by a FNA factory service center,
a FNA authorized service center or other qualified service personnel.
Always use identical replacement parts.
Serial
Number
___________
The manufacturer of this product agrees to repair or replace
designated parts that prove defective within the warranty period listed
below at the manufacturer's sole discretion. Specific limitations/
extensions and exclusions apply.
This warranty covers defects in material and workmanship and
not parts failure due to normal wear, depreciation, abuse,
accidental damage, negligence, improper use, maintenance, or
storage. To make a claim under the terms of the warranty, all parts
said to be defective must be retained and available for return upon
request to a designated Warranty Service Center for warranty
inspection. The judgments and decisions of the manufacturer
concerning the validity of warranty claims are final.
These warranties pass through to the end user and are
non-transferable. As a factory authorized and trained Warranty
Service Center, the factory will honor the terms of all component
warranties and satisfy claims of the appropriate warranty provisions.
Normal wear items include, but are not limited to, valves and
seals, which are not covered by this warranty.
This warranty replaces all other warranties, express or
implied, including without limitation any warranties of merchantability
or fitness for a particular purpose and all such warranties are hereby
disclaimed and excluded by the manufacturer. The
manufacturer's warranty obligation is limited to repair and
replacement of defective products as provided herein and the
manufacturer shall not be liable for any further loss, damages, or
expenses – including damages from shipping, accident, abuse,
acts of God, misuse, or neglect. Neither is damage from repairs
using parts not purchased from the manufacturer or alterations
performed by non-factory authorized personnel. Failure to install
and operate equipment according to the guidelines put forth in the
instruction manual shall void warranty.
12

Publicité

Table des Matières
loading

Table des Matières