Oven Use; Electronic Oven Controls - Whirlpool WFG775H0HW Guide D'utilisation

Odors and smoke are normal when the oven is used the first few
times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive
to the fumes given off. Exposure to the fumes may result in
death to certain birds. Always move birds to another closed
and well-ventilated room.
Control Display
The display will flash when powered up or after a power loss.
Press the Cancel keypad to clear. When the oven is not in use, the
time of day is displayed.
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but it can be changed to
Celsius.
To change: Press and hold the Temp/Time up arrow keypad for
5 seconds. "°C" or "°F" will appear on the display. Repeat to
change back.
To exit mode, press the Cancel keypad.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
To change: Press and hold LIGHT for 5 seconds. Repeat to
change back.
To exit mode, press the Cancel keypad.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with a 120V power connection and permits the control features
to be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
To change: Press the Cancel keypad, the Cancel keypad, the
Temp/Time up arrow keypad, and TIMER SET/OFF. Repeat to
change back and end Demo mode.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One Tone
Valid keypad press
■
Oven is preheated (long tone)
■
Function has been entered
■
Reminder, repeating each minute after the end-of-cycle tones
■
Three Tones
Invalid keypad press
■
Four Tones
End of cycle
■
Use Settings to change the tone settings.

OVEN USE

NOTE: The convection fan will shut off when the oven door is
opened. If the oven door remains open for too long, the heating
elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will
continue to count down.

Electronic Oven Controls

Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press and hold the Temp/Time down arrow keypad for 5
seconds until the oven display shows the current setting, for
example "0°F CAL" or "00."
2. Press the Temp/Time up or down arrow keypad to increase
or to decrease the temperature in 5°F (3°C) amounts. The
adjustment can be set between 30°F (18°C) and -30°F (-18°C).
3. Press the Start keypad
9