Hendi 239698 Manuel D'utilisation page 6

Control panel of the appliance
Item: 239698
Item: 239711, 239872
EN
1. "Temp/ heating" key: Use this key to select the
required function. The function that is selected
is indicated by the lights. You can opt to set the
power level (Power), or the temperature (Temp),
both in combination with the timer.
2. "ON/OFF" key: Use this key to switch the appli-
ance on or to interrupt or reset the timer.
3. "Arrow" keys: Use these keys for programming
the capacity, temperature or time. The up arrow
increases the setting value and the down arrow
reduces the setting value.
Preparations before using for the first time
• Remove all protective packaging and wrapping.
• Keep the packaging if you intend to store your ap-
pliance in the future.
• Check to make sure the appliance is undamaged.
In case of incomplete delivery and damages.
Please contact supplier (See ==> Warranty).
6
4. "Timer" key: Use this key for setting the time up
to 180 minutes.
5. This is the display. You can read the programmed
value on this display. The steps for capacity con-
trol are from 100W to 3500W, 35°C to 240°C for
temperature control and from 0 to 180 minutes
for time settings.
• Clean the appliance before use (See ==> Cleaning
and Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and
heat resist surface that is safe against water
splashes.