Menuett 014815 Mode D'emploi page 19

WHEN THE TOTAL WEIGHT ON
THE SCALE IS > 0 G
1. The display shows ----- or 0 g when pressing
.
2. ----- indicates that data is being processed
– wait a moment.
3. 0 g and T are shown in the bottom left
corner of the display to indicate that the
taring function is on.
4. The capacity is reduced with the total
weight of the weighed articles.
5. Press .
FIG. 11
WHEN THE TOTAL WEIGHT ON
THE SCALE IS < 0 G
1. The display shows ----- or 0 g when pressing
.
2. ----- indicates that data is being processed –
3. Wait for a moment. The display shows 0 g
to show that the reset function is on.
4. The total capacity remains unchanged.
5. Press .
FIG. 12
AUTOMATIC POWER-OFF
The measuring jug also switches off if the
measured weight does not change within
about 30 seconds.
FIG. 13
MANUAL SWITCHING OFF
To save the batteries the product can also be
switched off manually by pressing the button
for 3 seconds.
FIG. 14
WARNINGS
1. Replace battery.
2. The scale is overloaded. Remove the
articles from the scale to avoid damaging
it. The max permitted weight is shown on
the scale.
FIG. 15
MAINTENANCE
• Clean the measuring jug with a damp
cloth. Remove the beaker from the scale
before cleaning. Check that the beaker is
empty before removing it. Do not immerse
the scale in water or any other liquid. The
scale is not waterproof.
• Clean the plastic parts on the measuring
jug immediately on contact with fat, spices,
vinegar and strong flavoured or coloured
food. Avoid contact with acid and lemon
juice, etc.
• Place the measuring jug on a hard, flat
surface. Do not put it on a soft surface.
• Store the measuring jug in cool, dry place.
• If the measuring jug does not start, check
that the battery is inserted and not
discharged.
EN
19