Changing The Picture Standard - Samsung PN42B400P3D Guide De Configuration Rapide

When selecting the Cable TV system:
Press the ENTERE button to start the auto
program. Press the ◄ or ► to select the correct
analog signal cable system source among STD,
HRC, and IRC, then press the ENTERE button.
If you have Digital cable TV, select the cable system
signal source for both Analog and Digital.
➢ STD, HRC, and IRC identify various types of
cable TV systems. Contact your local cable
company to identify the type of cable system
that exists in your particular area. At this point
the signal source has been selected.
Auto Program in Progress.
DTV Air : 5
DTV Cable : --
The TV begins memorizing all available stations.
➢ After all the available channels are stored, it
starts to remove scrambled channels. The Auto
program menu then reappears.
➢
If you want to stop Auto Programming,
press the ENTERE button. The Stop Auto
Program? message will be displayed. Select
Yes by pressing the ◄ or ► button, then press
the ENTERE button.
Press the EXIT button to exit.
Auto Program is completed.
56 channels are memorized.
DTV Air : 20
DTV Cable : 15
BN68-02444A.indb 8
Auto Program
Air : 4
11
Cable : --
Air
3%
Stop
Enter Return
Auto Program
Air : 11
Cable : 10
OK
Enter Return
English - 8

Changing the Picture Standard

You can select the type of picture which best corresponds to
your viewing requirements.
Press the MENU button to display the menu.
Press the ENTERE button to select Picture.
Mode : Standard
Cell Light : 4
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select Dynamic,
Standard, or Movie.
Press the ENTERE button.
Mode :
Dynamic
Cell Light : 7 Standard
Movie
Contrast : 80
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
● Dynamic: Select a high-definition picture for
bright environments.
● Standard: Selects the optimal picture display for
normal environments. This setting is convenient
for most situations.
● Movie: Selects a comfortable picture display for
dark environments.
Press the EXIT button to exit.
►
2009-09-10 9:51:26