Basic Features
ECO Sensor (Off / On)
■
savings; the picture settings will automatically adapt to
the light in the room.
✎
If you adjust the
set to Off.
Min Backlight: When ECO sensor is On, the minimum
screen brightness can be adjusted manually.
✎
If
Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
No Signal Power Off (Off / 15 min / 30 min / 60 min)
■
Activates the Stand-by mode, in the case of "No Signal"
or "Check Signal Cable" status for a certain period of
time defined by the user.
✎
Disabled when the PC is in power saving mode.
Changing the Picture Options
¦
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎
In PC mode, you can only make changes to
Contrast, Gamma and White Balance.
Advanced Settings
Black Tone
Dynamic Contrast
Shadow Detail
Gamma
RGB Only Mode
Colour Space
White Balance
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High)
■
the screen contrast.
Shadow Detail (-2~+2)
■
images.
✎
Disabled under PC mode.
: Adjust the primary colour intensity.
Gamma
■
■ RGB Only Mode (Off / Red / Green / Blue): You can
adjust Colour or Tint of Red, Green or Blue for the
picture from an external device (DVD player, home
theatre, etc.).
Colour Space (Auto / Native)
■
colors available to create the image.
14
English
: To enhance your power
Backlight, the Eco Sensor will be
Dynamic
: Off
: Medium
: 0
: 0
: Off
: Native
▼
U Move E Enter R Return
: Select the
: Increase the brightness of dark
: Adjust the range of
White Balance
■
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour's
(red, green, blue) darkness.
R-Gain/G-Gain/B-Gain: Adjust each colour's
(red, green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Flesh Tone
■
Edge Enhancement (Off / On)
■
:
boundaries.
xvYCC (Off / On)
■
increases detail and colour space when watching movies
from an external device (e.g. DVD player) connected to
the HDMI or Component IN jacks.
✎
Available when the picture mode is set to
and when the external input is set to HDMI or
Component.
✎
Some external devices may not support this
function.
Picture Options
✎
In PC mode, you can only make changes to the
Tone, Size, Digital Noise Filter and Auto Protection
Time.
►
Colour Tone
Size
Screen Mode
Digital Noise Filter
MPEG Nosie Filter
HDMI Black Level
Film Mode
Colour Tone (Cool / Normal / Warm1 / Warm2)
■
✎
Warm1
: Adjust
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
: Adjust the colour temperature for a
: Emphasize pink "Flesh Tone."
: Emphasize object
: Setting the xvYCC mode on
Picture Options
: Normal
: 16:9
: 16:9
: Auto
: Auto
: Normal
: Off
▼
U Move E Enter R Return
or Warm2 will be deactivated when the
Movie
Colour
►