Prepare Installation Space; Cutout Dimensions For 30" Cooktops; Cutout Dimensions For 36" Cooktops - Thermador Masterpiece Serie Guide D'installation

Prepare Installation Space

Create the cut-out in the countertop according to the
installation diagram. The angle of the cut surface to the
countertop must be 90°.
The lateral cut-out edges must be flat in order to ensure
that the retaining springs are positioned properly on the
appliance. With multi-layered countertops, secure strips
laterally in the cut-out if necessary.
After creating cut-out, remove shavings. Seal cut
surfaces in a heat- and water-resistant manner.
Observe minimum distance between device underside
and cabinet surfaces of

Cutout dimensions for 30" cooktops

Models: CEM305TB, CET305TB
6
/ " (10 mm).
3
8
P r e p a r e I n s t a l l a t i o n S p a c e

Cutout dimensions for 36" cooktops

Models: CEM366TB, CET366TB