Extra Battery Connection - EcoFlow RIVER Pro Manuel D'utilisation

3.10 Extra Battery Connection

Get the RIVER Pro , RIVER Pro Extra Battery and Expansion Power Cable ready. Power off both the
RIVER Pro and RIVER Pro Extra Battery before attempting to connect them together. If the products
are not turned off, they cannot be successfully connected. Then follow the steps below.
1. Open the Expansion Port cover below the AC port of the RIVER Pro to access the Expansion
Power Port. Connect the Expansion Power Cable to the port. Tighten the screws on both sides of
the port to secure the connection.
2. Open the Expansion Port cover of the RIVER Pro Extra Battery to access the Expansion Power
Port. Connect the free end of the Expansion Power Cable to the RIVER Pro Extra Battery
Expansion Power Port. Tighten the screws on both sides of the port to secure the connection.
3. Turn on the power button of the RIVER Pro or RIVER Pro Extra Battery. If the display of the RIVER
Pro shows the extra battery icon, the connection is successful. Fully charge the products for the
first time and ensure the voltage is consistent to maximize the performance.
10
Expansion Power Cable
* Not included in the package, this cable only
comes with RIVER Pro Extra Battery