River Pro And River Pro Extra Battery Connection - EcoFlow RIVER Pro Mode D'emploi

RIVER Pro and RIVER Pro Extra Battery Con-
nection
Get the RIVER Pro , RIVER Pro Extra Battery and Expansion Power Cable ready. Power off both the RIVER Pro
and RIVER Pro Extra Battery before attempting to connect them together. If the products are not turned off, they
cannot be successfully connected. Then follow the steps below.
1. Open the Expansion Port cover below the AC port of the RIVER Pro to access the Expansion Power Port. Con-
nect the Expansion Power Cable to the port. Tighten the screws on both sides of the port to secure the connec-
tion.
2. Open the Expansion Port cover of the RIVER Pro Extra Battery to access the Expansion Power Port. Connect
the free end of the Expansion Power Cable to the RIVER Pro Extra Battery Expansion Power Port. Tighten the
screws on both sides of the port to secure the connection.
3. Turn on the power button of the RIVER Pro or RIVER Pro Extra Battery. If the display of the RIVER Pro shows
the extra battery icon, the connection is successful. Fully charge the products for the first time and ensure the
voltage is consistent to maximize the performance.
3
11
1
2
Expansion Power Cable
* Not included in the package, this cable only
comes with RIVER Pro Extra Battery