Using Your Blender; Before First Use - Hamilton Beach 58158 Mode D'emploi

Using Your Blender

IMPORTANT: Your blender jar and cutting blade assembly are subject to wear during normal use. Always inspect jar for nicks, chips, or
cracks. Always inspect cutting blade assembly for broken, cracked, or loose blades. If jar or cutting blade assembly is damaged, do not use.
Call our toll-free customer service number to obtain replacement parts.
1
5
840233300 ENv04.indd 5 840233300 ENv04.indd 5
BEFORE FIRST USE: After unpacking the blender, follow the instructions
in "Cleaning Your Blender."
2
6
Push the desired speed button.
When using the PULSE buttons,
the blender will only run when
the button is held down.
3
7
4
WARNING! Burn Hazard: When
blending hot liquids, remove
filler-cap of two-piece lid and
close the edge cover opening
intended for pouring. To prevent
possible burns: Do not exceed
the 3-cup (710-ml) level. Hot
liquids may push off two-piece
lid during blending; therefore,
with the protection of an oven
mitt or thick towel, place one
hand on top of the lid, keep
exposed skin away from the
lid, and start blending at lowest
speed.
7/30/13 8:27 AM 7/30/13 8:27 AM
5