PR electronics 9113 Mode D'emploi page 56

Safety Manual
27
28
29
30
31
32
33
34
35
36
37
38
16
9113 TeMperaTure / ma CONVerTer
Action
Verify Ni sensor type and press OK
(ONLY IF SENSOR = Ni and CH2.TYP = TEMP)
Verify Thermocouple type and press OK
(ONLY IF SENSOR = TC and CH2.TYP = TEMP)
Verify CJC type and press OK
(ONLY IF SENSOR = TC and CH2.TYP = TEMP)
Verify fixed output range for current output
Verify fixed output value on detected sensor error
and press OK
(ONLY IF CH2.TYP = TEMP, or IF I.RANGE = 4-20
mA or 20-4 mA)
Verify temperature for 0% output and press OK
(ONLY IF CH2.TYP = TEMP)
Verify temperature for 100% output and press OK
(ONLY IF CH2.TYP = TEMP)
Verify analogue output response time and press OK CH1.CAL
Verify the use of applied process calibration values
for Channel 1 and press OK
Verify the use of applied process calibration values
for Channel 2 and press OK
Verify password and press OK
Verify SIL mode within 1 second
Version No. V6R0
Display shows
TC.TYPE
CJC
O.RANGE
OUT.ERR
OUT.LO
OUT.HI
RESP
CH2.CAL
PASSW.
SIL.OK