Figure 6: Smd For Amf Mode - Briggs & Stratton GC1030 Serie Mode D'emploi

transferred to the genset. If the Mains voltage returns to normal, the controller will sense this and return
the load back to the Mains, further it will stop the genset after a cool down period.
Cooling
Down in LIM
Mains = 0 and
No Warning/No Electric Trip/No Shutdown
Engine Off
Mains ON = 1
or Electric trip
Engine

Figure 6: SMD for AMF mode

Emergency shutdown input = 1
Or Genset shutdown action = 1
Engine On
Engine Start
Time >= [Time of warm up + Time of load
transfer] and Mains ON = 0 and Remote
start = 1
Page | 15