Let's Go Aero BikeWing V2 Manuel Du Produit page 4

STEP 7:
Insert two (2) Wheel Cradles [M] with Rubber
Straps [N] facing in opposite directions into the
Wing [L] as shown. [Fg. 9]
Secure with Retainer Clip [O].
OPERATION: BICYCLE MOUNTING
Hang bicycles by the tires on the Wheel Cradles [M] with the chain rings to the outside. [Fg. 10 & 11]
Adjust the Foam Bumpers located on the Wings [L] to protect the frame of the bicycle.
IMPORTANT: For two bicycles, position the bicycles facing in opposite directions (front-to-back/back-to-front) with the
chain ring to the outside.
Some adjustment of the Wheel Cradles may be necessary in order to accommodate both bicycles.
M
Secure Rubber Straps [N] on to the Upper Wheel Cradles [M] using the tightest hole available. [Fg. 12 & 13]
M
[Fg. 9]
O
[Fg. 10]
[Fg. 12]
Page 4 of 11
L
M
N
[Fg. 11]
[Fg. 13]